Motion detector DALI with stand-by level
DM TE1 DA2
DINUY tips to choose your motion detector
187,28€ PVR
Description:
Inflared Movement Detector for DALI equipments, Led or Fluorescent with stand-by level adjustment:
· Stand by level: When there is no movement the lights go to the preadjusted level (0% ~ 50%) instead of being turned off completely.
Flush Ceiling mounting.
Posibility to expansion the coverage area of the movement detector using slave sensors (DM SEN T03).
Application Examples: Oficces, schools, hospitals, hotels…
Maximum current input.
Maximum current output.
IR Remote Control for parameters Adjustment.
Allowing adjustment of: Time Delay and Brightness.
3 advantajes:
· Save time in the installation.
· Same adjustment for all motion detector of the same Installation.
· Cancel potentiometer control which prevents unwanted manipulations.
Slave Motion Detector. It allows to extend the covered area installing several sensors.
RJ11 Phone connection, which simplify the installation.
Possibility to connect up to 14 slave sensor to a single master detector. Includ a 5,5m wired.
- Technical characteristics
- Installation
- Documents
- Logistics data
Technical characteristics DM TE1 DA2
| Product reference | DM TE1 DA2 |
| Power Supply (V) | 230VCA |
| Frequency (Hz) | 50 |
| Consumption | 2W |
| Output channels | 1 |
| Type of load | Ballast or Driver DALI |
| Switching capacity (A) | 16 |
| LED lamps load (W) | 0 |
| Halogen lamps with ferromagnetic trafo (W | 0 |
| Maximum Number of Equipments | 64 |
| Voltage-free contacts | No |
| Detecting angle (º) | 360 |
| Mounting height (m) | 2.5 |
| Coverage diameter (m) | 7 |
| Maximum number of extra movement sensor | 14 |
| Dimming level (%) | 0 - 50 |
| Minimum Time setting (seconds) | 5 |
| Minimum Brightness level (lux) (min) | 3 |
| Maximum Brightness level (lux) (max) | 100 |
| Tecnology | Infrareds (PIR) |
| Mounting | Flush ceiling |
| Fluorescent lamps load(VA) | 0 |
| Admits contactor | Yes |
| Zero crossing point | Yes |
| Minimum Working Temperature (ºC) (min) | 0 |
| Maximum Working Temperature (ºC) (max) | 40 |
| Protection Level | IP40, Class II |
Installation DM TE1 DA2
Documents DM TE1 DA2
Product
| Width (mm) | 80 |
| Depth (mm) | 63.5 |
| Height (mm) | |
| Weight (g) | |
| Unit EAN | 8422447015218 |
Packaging
| Type of packaging | BX |
| Packing unit | |
| Packing width (mm) | 135 |
| Packing depth (mm) | 91 |
| Packing height (mm) | 72,5 |
| Gross packing weight (kg) | 0,15 |
