Motion and light sensors
Simple solutions to reduce energy consumption and costs
At DINUY we develop our detectors to achieve the highest precision in the detection of moving heat sources. By incorporating a luminosity sensor into the detectors, they can switch the ambient luminosity in relation to the movement and the established timing
Our highly sensitive PIR sensors and FRESNEL lens with more than 135 hexagons make our motion detectors the perfect lighting control solution depending on the presence of people.
The FRESNEL lens divides its coverage area into multiple small segments that measure the heat radiation emitted by people or animals. The temperature differences in the different segments caused by movement are captured by the PIR sensor.
DINUY detectors have time, luminosity and sensitivity adjustments, to adapt to the needs of each installation by potentiometers or by remote control.
Most of our detectors incorporate 16A relays, and ZCT Zero Crossing Technology, “zero crossing technology”. The ZCT allows switching all types of loads.
Own technology, manufacturing and design
With a Technical Department in constant research and development of new solutions, we achieve the solutions that customers are looking for without leaving our facilities.
Our specialists provide all the support and necessary advice to find the most appropriate solution for each project.
Advantages of motion detectors
Confort
Comfort when entering and leaving the rooms. The detector takes care of turning the lights on and off.
Consumption control
We reduce electricity consumption because we achieve a rational use of lighting.
Low investment
Simple and low cost installations.
Motion Detector Selection Table
|
Reference
|
Description
|
Mounting
|
Coverage
|
Switching capacity
|
Zero Crossing Technology
|
Led charge
|
Output channel |
Free-voltage |
Remote control
|
IP |
| DM TEC 008 | 1 channel | Flush ceiling | ø7m 360º | 10A | Yes | 200W | On/Off | No | No | IP40 |
| DM TEC 003 | White | Flush ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | No | Yes | IP40 |
| DM TEC 03P | Silver | Flush ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | No | Yes | IP40 |
| DM TEC 03N | Black | Flush ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | No | Yes | IP40 |
| DM TEC 001 | White | Ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | No | Yes | IP40 |
| DM TEC 01P | Silver | Ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | No | Yes | IP40 |
| DM TEC 01N | Black | Ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | No | Yes | IP40 |
| DM TEC 000 | Mini | Flush ceiling | ø6m 360º | 10A | Yes | 400W | On/Off | No | No | IP40 |
| DM TEC 004 | With slaves | Flush ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | No | Yes | IP40 |
| DM SEN T03 | Slave | Flush ceiling | ø7m 360º | - | - | - | - | - | Yes | IP40 |
| DM TEC 002 | 2 Channels | Flush ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | Yes | Yes | IP40 |
| DM TEC PA1 | Special for corridors | Flush ceiling | 22m x 4m | 16A | Yes | 400W | On/Off | No | Yes | IP40 |
| DM TEC 011 | Free-voltage | Flush ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | Yes | Yes | IP40 |
| DM TEC 010 | High Bay | Ceiling | ø16m 360º | 10A | No | 400W | On/Off | No | Yes | IP54 |
| DM TEC 100 | High Bay | Ceiling | ø15m 360º | 16A | Yes | 400W | On/Off | No | Smartphone | IP40 |
| DM TEC 300 | High coverage | Surface or flush ceiling | ø30m 360º | 10A | No | 400W | On/Off | No | Yes | IP40/44 |
| DM TEC 241 | 24V | Ceiling | ø7m 360º | 16A | Yes | 200W | On/Off | Yes | Yes | IP40 |
| DM TEC 243 | 24V | Flush ceiling | ø7m 360º | 16A | Yes | 200W | On/Off | Yes | Yes | IP40 |
| DM TEC IV1 | Inverted output | Ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | Yes | No | IP40 |
| DM TEC IV8 | Inverted output | Flush ceiling | ø7m 360º | 16A | Yes | 400W | On/Off | Yes | No | IP40 |
| DM TE1 001 | Minimum level adjustment | Ceiling | ø7m 360º | 16A | Yes | 80 Drivers | 1-10V | No | Yes | IP40 |
| DM TE1 002 | Minimum level adjustment | Flush ceiling | ø7m 360º | 16A | Yes | 80 Drivers | 1-10V | No | Yes | IP40 |
| DM TE1 DA1 | Minimum level adjustment | Ceiling | ø7m 360º | 16A | Yes | 64 Drivers | DALI | No | Yes | IP40 |
| DM TE1 DA2 | Minimum level adjustment | Flush ceiling | ø7m 360º | - | - | 64 Drivers | DALI | No | Yes | IP40 |
| DM BRA 000 | Surface | Wall or Ceiling | 12m 180º | 10A | No | 400W | On/Off | Yes | No | IP55 |
| DM SUP 000 | Surface | Wall | 12m 180º | 16A | Yes | 400W | On/Off | No | Yes | IP44 |
| DM SUP 002 | Surface | Wall | 12m 240º | 16A | Yes | 400W | On/Off | No | Yes | IP54 |
| DM CAM 001 | A 3 Wires | Mechanism box | 8m 200º | 16A | Yes | 400W | On/Off | No | Yes | IP40 |
| DM CAM 003 | A 2 Wires | Mechanism box | 8m 200º | 1A | Yes | 100W | On/Off | No | No | IP40 |
| DM HF1 000 | High frecuency | Hidden | ø8m 360º | 4A | No | 200W | On/Off | No | No | IP40 |