Products / Dimmers / Dimmer for LED lamps with terminals

Dimmer for LED lamps with terminals

RE PLE LE3

75,68€ PVR

Description:

Dimmer for LED lamps, in puck housing, with terminal block.
Compatible with:
- 230V LED Lamps dimmable by leading-edge.
- 230V LED Lamps dimmable by trailing-edge.
- 12V LED Lamps with electronic transformer.
Control by conventional Pushbuttons: short press - On/Off and Sustained press - Dimming.
Memory function: when switching-on by the pushbutton, the luminaires return to the same level as they had before they were switched-off.
Puck housing. Junction-box mounting.
Minimum dimming level setting knob which avoids flickering at low levels.
Protected against overloads and short circuits. Incorporates heating protection which reduces the light level in case of overheating.

Product reference	RE PLE LE3
Power Supply (V)	230VCA
Frequency (Hz)	50/60
Consumption	2VA
Output channels	0
Maximum power (VA)	0
Type of load	Dimmable LED lamps
Dimmable 230V LED lamps (leading edge)	4W ~ 100W
Dimmable 230V LED lamps (trailing edge)	4W ~ 350W
Dimmable 12V LED lamps with electronic transformer	6 transfo of 50W and 1 lamp per transfo or 3 transfo of 100W and 1 lamp per transfo
Maximum current input 1/10VDC (mA)	0
Maximum Number of Equipments	0
Control	Pushbutton
Maximum number of lighting pushbuttons	3
Module number	0
Connection terminals	Captive Screws
Cable section (mm2)	2.5
Minimum Storage Temperature (ºC) (min)	-30
Maximum Storage Temperature (ºC) (max)	70
Installation	Junction box
Minimum Working Temperature (ºC) (min)	0
Maximum Working Temperature (ºC) (max)	40
Protection Level	IP20, UNE 20324
According with Directives	2014/35/EU LV; 2014/30/EU EMC; 2011/65/EU RoHS
According to the Standard	UNE-EN 60669-1:2018; UNE-EN 60669-2-1:2005, +erratum:2008, +/A1:2010, +/A12:2011; UNE-EN 60669-2-3:2007