Products / KNX Devices / Motion detector 360º ceiling mounted

Motion detector 360º ceiling mounted

DM KNT 001

152,43€ PVR


KNX PIR motion detectors with luminosity sensor. The lux level and time delay can be set with the control knobs, by using the IR remote control (EM MAN DM0) or via ETS. One PIR sensor and a high resolution lens can detect the smallest movement. Depending on the parameterization by ETS, this detectors can work as: · Motion detection: depending on the movement and the daylight. · Twilight switch: teach-in brightness threshold for daylight-dependent switching. · Constant light control: with dimming telegrams. · Signal monitoring: motion detection without brightness sensor. · Brightness sensor: light sensor without motion detection. · Temperature sensor: sends the temperature value. Detection area of 360º and maximum 7m at 2.5m high. Flush ceiling mounted. Power supplied by the Bus. Programation by ETS3 or later version.
  • Technical characteristics
  • Documents
  • Logistics data

Technical characteristics DM KNT 001

Product reference DM KNT 001
Power Supply (V) 21Vcc - 32Vcc
Consumption 9,3mA
Output channels 1
Maximum Number of Equipments 0
Detecting angle (º) 360
Mounting height (m) 2.5
Coverage diameter (m) 7
Programming by ETS3 or later
Start up System Mode
Minimum Time setting (seconds) 0,1
Minimum Brightness level (lux) (min) 5
Maximum Brightness level (lux) (max) 1000
Tecnology Infrareds (PIR)
Mounting Flush ceiling
Admits contactor No
Zero crossing point No
Compatible with KNX
Minimum Working Temperature (ºC) (min) -5
Maximum Working Temperature (ºC) (max) 45
Protection Level IP20, Class II


Width (mm) 80
Depth (mm) 40
Height (mm)
Weight (g) 84
Unit EAN 8422447013863


Type of packaging BX
Packing unit
Packing width (mm) 93
Packing depth (mm) 82
Packing height (mm) 68
Gross packing weight (kg) 0,084

Related products

DM KNT 003

Motion detector 200º mechanism box-mounted

View more

DM KNT 004

Motion detector 360º flush ceiling mounted

View more