Products / Motion and Presence Detectors / Ceiling surface mounting Bluetooth 360º motion detector (white)

Ceiling surface mounting Bluetooth 360º motion detector (white)

DM TEC B1B

DINUY tips to choose your motion detector

110,07€ PVR

Description:

- Indoor "3 in 1" detector, for ceiling surface mounting with the following operating modes: - Motion detector; - Presence detector; - Twilight switch. - It has a switching channel with 16A relay. - ZCT (Zero Crossing Technology), "zero crossing" switching, which allows the control of large loads without damaging the relay. - Highly sensitive PIR sensor, which detects the smallest movement within its coverage area. - Possibility of connecting several detectors in parallel to extend the detection area. - It incorporates a red LED indicator that helps to test the correct detection of movement of the device. -Incorporates a blue LED indicator to identify that the detector is Bluetooth enabled.

Technical characteristics
Dimensions
Installation
Documents
Logistics data

Technical characteristics DM TEC B1B

Product reference	DM TEC B1B
Power Supply (V)	230V
Frequency (Hz)	50/60
Consumption	< 1W
Output channels	1
Type of load	16A cos φ = 1
Switching capacity (A)	16A
LED lamps load (W)	400W
Incandescent and Halogen 230V (W)	3000W
12V Halogen with electronic transformer (W)	3000W
Halogen lamps with ferromagnetic trafo (W	2400W
Maximum current input 1/10VDC (mA)	0
Maximum Number of Equipments	0
Voltage-free contacts	No
Detecting angle (º)	360
Mounting height (m)	2.5
Coverage diameter (m)	7
Minimum Time setting (seconds)	1 sec
Maximum Time setting (minutes)	60
Minimum Brightness level (lux) (min)	5
Maximum Brightness level (lux) (max)	2000
Mounting	Surface on ceiling
Fluorescent lamps load(VA)	1300W (130µF)
Admits contactor	Yes
Zero crossing point	Yes
Minimum Working Temperature (ºC) (min)	-10
Maximum Working Temperature (ºC) (max)	45
Protection Level	IP40, Class II