Motion Detectors for Wired Installations

WALL MOUNTING

  • MOTION DETECTOR WALL MOUNTING – DM BRA 000

    • Wall or ceiling mounted IR motion detector.
    • Coverage: 180º and 12m (max.)
    • Time delay, brightness level and sensitivility are adjustable.
    • Maximum load: 2000W. Admits fluorescence and LED lamps.
    • Environmental protection: IP55.
  • MOTION DETECTOR WALL MOUNTING – DM SUP 000

    • Wall mounted IR motion detector.
    • Coverage: 180º and 12m (max.).
    • Time delay and brightness level are adjustable.
    • Maximum load: 3000W. Admits fluorescence and LED lamps.
    • Environmental protection: IP44.
    • Adjustable by remote control (EM MAN DM0).
  • MOTION DETECTOR WALL MOUNTING – DM SUP 002

    • Wall or corner mounted IR motion detector.
    • Coverage: 240º and 12m (max.).
    • Time delay, brightness level and sensitivity are adjustable.
    • Maximum load: 3000W. Admits fluorescence and LED lamps.
    • Environmental protection: IP54.
    • Adjustable by remote control (EM MAN DM0).

CEILING MOUNTING

  • MOTION DETECTOR CEILING MOUNTING – DM SEN T03

    Motion detector with PIR technology, flush ceiling installation.
    Slave detector for master movement detectors: DM TEC 004, DM TE1 002 or DM TE1 DA2.
    Up to 14 slaves can be installed for only one master movement detector, allowing to extend the coverage area.
    Time delay and brightness adjustable by potentiometers and remote control (EM MAN DM0). Sensitibity remote control.
    Possibility to memorized the bightness level by remote control.
    Coverage of 360º and Ø7m, at 2,5m of high.
    Rapid connection by RJ11 conector to the DM TEC 004.
    5,5 meters cable extender included.
    Aplication examples: Ofices corridors, hotels, schools…

  • MOTION DETECTOR CEILING MOUNTING – DM TEC 000

    • Mini IR motion detector (ceiling hole: Ø32mm).
    • Flush-ceiling mounting.
    • Time delay, brightness level and sensitivity are adjustable.
    • Coverage: 360° in Ø6m (max. at 2.5m high).
    • Maximum load: 2000W. Admits fluorescent and LED lamps.
  • MOTION DETECTOR CEILING MOUNTING – DM TEC 001

    • Surface-ceiling mounted IR motion detector.
    • Coverage: 360° in Ø 7m (max at 2.5m high).
    • Time delay, brightness level and sensitivity (by remote control) are adjustable.
    • Maximum load: 3000W. Admits fluorescent and LED lamps.
    • Adjustable by remote control (EM MAN DM0).
  • MOTION DETECTOR CEILING MOUNTING – DM TEC 002

    • Flush-ceiling mounted IR motion detector.
    • Coverage: 360º in Ø7m (max. at 2.5m high).
    • Time delay, brightness level and sensitivity are adjustable.
    • Maximum load: 3000W. Admits fluorescent and LED lamps.
    • 2 output channels for two different loads (e.g: lamps and extractor fan).
  • MOTION DETECTOR CEILING MOUNTING – DM TEC 003

    • Flush-ceiling mounted IR motion detector.
    • Coverage: 360º in Ø 7m (max. at 2.5 high). Time delay, brightness level and sensitivity (by remote control) are ajustable.
    • Maximun load: 3000W. Admits fluorescent and LED lamps.
    • Adjustable by remote control (EM MAN DM0).
  • MOTION DETECTOR CEILING MOUNTING – DM TEC 004

    • Flush-ceiling mounted IR motion detector.
    • Coverage: 360° in Ø7m (max. at 2.5m high).
    • Time delay, brightness level and sensitivity (by remote control) are adjustable.
    • Maximum load: 3000W. Admits fluorescent and LED lamps.
    • 1 output channel.
    • Admits up to 15 extra sensors (DM SEN T03).
    • Adjustable by remote control (EM MAN DM0).
  • MOTION DETECTOR CEILING MOUNTING – DM TEC 008

    • Motion detector with PIR technology, flush ceiling installation.
    • Coverage of 360° and Ø 7m, at 2.5m of high.
    • Zero crossing point technology to protect the contactors of reles and manage high loads.
    • Valid for all type of lamps, including LEDs and Fluorescents.
  • MOTION DETECTOR CEILING MOUNTING – DM TEC 010

    • Detector for installation at high altitude, for example and industrial buildings, sports centers, warehouses, etc.
    • Ceiling mounting surface, covering up to 16m in diameter at a height 10m.
    • Valid for all types of lamps including LED, fluorescent, low consumption, etc.
    • Simple progamming from the detector or adjustable by remote control (EM MAN DM2).
  • MOTION DETECTOR CEILING MOUNTING – DM TEC 011

    • Flush-ceiling mounted IR motion detector.
    • Coverage: 360º in Ø7m (max. at 2.5 high).
    • Time delay, brightness level and sensitivity (by remote control) are adjustable.
    • Maximum load: 3000W. Admits fluorescent and LED lamps.
    • 1 output channel.
    • Admits up to 15 extra sensors (DM SEN T03).
    • Adjustable by remote control (EM MAN DM0).
  • MOTION DETECTOR CEILING MOUNTING – DM TEC 300

    High-coverage ceiling IR motion detector
    Surface or flush ceiling mounting
    Time delay, brightness level and sensitivity are adjustable
    Coverage: 360º in Ø30m (max. at 2.5m high)
    Maximum load: 2000W. Admits fluorescent and LED lamps
    Adjustable by remote control (EM MAN DM1)

  • MOTION DETECTOR CEILING MOUNTING – DM TEC PA1

    • Ceiling mounted PIR motion detector specially-designed for narrow areas, for example: corridors.
    • Flush-ceiling mounting.
    • Coverage: 22m x 4m (max. at 2.5m high and walking across).
    • Time delay, brightness level and sensitivity (by remote control) are adjustable.
    • Maximum load: 3000W. Admits fluorescents and LED lamps.
    • Adjustable by remote control (EM MAN DM0).
  • Motion Detector for UV light OFF – DM TEC IV8

    • PIR Motion Detector for flush-ceiling mounting.
    • 1-output channel with 16A free-voltage relay and normally closed contact.
    • The Logic of operation is inverse to the standard one. Allows turning off the lighting when a movement is detected in its
    coverage area.
    • In addition, through a second time delay, it allows the lighting to be activated once movement is no longer detected and the set
    delay time elapses.
    • Coverage: 360º in Ø7m (max.) at 2.5m high.
    • Zero crossing point technology to protect the contacts of the relay and manage high loads.
    • Valid for all type of lamps, including LED and UV lamps.
    • Application examples: control of germicidal lamps for disinfecting rooms.

  • MOTION DETECTOR FOR UV LIGHT OFF – DM TEC IV1

    • PIR Motion Detector for surface ceiling mounting. 
    • 1 output channel with 16A relay and normally closed contact. 
    • The Logic of operation is inverse to the standard one. Allows turning off the lighting when a movement is detected in its coverage area. 
    • In addition, through a second time delay, it allows the lighting to be activated once movement is no longer detected and the set delay time elapses.
    • Adjustable time delay by potentiometer. 
    • Coverage: 360º in Ø7m (max.) at 2.5m high 
    • Valid for all type of lamps, including LED and UV lamps. 
    • Application examples: control of germicidal lamps for disinfecting rooms.

UNIVERSAL MECHANISM BOX MOUNTING

  • MOTION DETECTOR BOX MOUNTING – DM CAM 001

    • Universal mechanism box mounted IR motion detector.
    • Coverage: 200º in 8m( max.).
    • Time delay, brightness level and sensitivity are adjustable.
    • Maximum load: 2000W. Admits fluorescent and LED lamps.
    • 3-wires installation.
  • MOTION DETECTOR BOX MOUNTING – DM CAM 003

    • Universal mechanism box mounted IR motion detector.
    • Coverage:  200° in 8m (max.).
    • Time delay, brightness level and sensitivity are adjustable.
    • Maximum load: 400W. Does not admit contactor, fluorescence, LED lamps.
    • 2-wires installation.

OTHER VOLTAGES

  • MOVEMENT DETECTOR 24V – DM TEC 241

    • Rated voltage: 24Vd or 24Vac.
    • Surface-ceiling mounted IR motion detector.
    • Coverage: 360° in Ø 7m (max at 2.5m high).
    • Time delay, brightness level and sensitivity (by remote control) are adjustable.
    • Maximum load: 1500W. Admits fluorescent and LED lamps.
    • Adjustable by remote control (EM MAN DM0).
  • MOVEMENT DETECTOR 24V – DM TEC 243

    • Rated voltage: 24Vd or 24Vac.
    • Surface-ceiling mounted IR motion detector.
    • Coverage: 360° in Ø 7m (max at 2.5m high).
    • Time delay, brightness level and sensitivity (by remote control) are adjustable.
    • Maximum load: 1500W. Admits fluorescent and LED lamps.
    • Adjustable by remote control (EM MAN DM0).

WITH STAND-BY LEVEL SETTING

  • MOVEMENT DETECTOR 1/10VDC EQUIPMENTS – DM TE1 001

    • Ceiling mounted IR motion detector with stand-by level setting for 1/10Vdc equipments.
    • Surface-ceiling mounting.
    • Coverage: 360º in  ᴓ7m (max. at 2,5m high).
    • Maximun load: 80 1/10V ballasts.
    • Adjustable by remote control (EM MAN DM0).
  • MOVEMENT DETECTOR FOR 1/10VDC EQUIPMENTS – DM TE1 002

    • Ceiling mounted IR motion detector with stand-by level setting for 1/10 Vdc equipmets. 
    • Flush-ceiling mounting.
    • Coverage: 360º in  ᴓ7m.
    • Maximun load: 80 1/10V ballasts.
    • Adjustable by remote control (EM MAN DM0).
  • MOVEMENT DETECTOR FOR DALI EQUIPMENTS – DM TE1 DA1

    • Ceiling mounted IR motion detector with stand-by level setting for DALI equipments.
    • Surface-ceiling mounting.
    • Coverage: 360° in ø 7m (max. at 2.5 high)
    • Maximun load: 64 DALI ballasts.
    • Adjustable by remote control (EM MAN DM0).
  • MOVEMENT DETECTOR FOR DALI EQUIPMENTS – DM TE1 DA2

    • Ceiling mounted IR motion detector with stand-by level setting for DALI equipments.
    • Flush-ceiling mounting
    • Coverage: 360° in ø 7m (max. at 2.5 high)
    • Maximun load: 64 DALI ballasts.
    • Adjustable by remote control (EM MAN DM0).

CONCEALED MOUNTING (HIGH FREQUENCY)

  • HIGH FRECUENCY MOVEMENT DETECTOR – DM HF1 000

    • High frecuency (radar) Movement Detector, hidden instalation. Its emits a high-frecuency electromangnetic wave 5.8Hz and receives its echo.
    • Sensor detects the change in echo from movement in its detection zone. A microprocessor then triggers the switch light ON command.
    • High-frecuency output of this sensor is < 0,2mW: approximately just 1% of the transmission power of a mobile telephone or the output of a microwave oven. 
    • Time delay, brightness level and sensitivity are adjustable by DIPs.
    • Coverage of 360º and Ø12m of high and 20ºC ∼ 25ºC.
    • Valid for all type of lamps, including LEDs and Fluorescent.
    • Application Examples: Public bathrooms, elevators, etc.

LED LAMP FIXTURE

  • LED LIGHT WITH PIR MOTION DETECTOR – DM PIR PL2

    • Ceiling-mounting LED light with built-in PIR movement detector.
    • Infrared detection technology, which is activated by detecting movement of people, or other heat sources, within its coverage area.
    • After the LED light is activated, it will remain on for the delay time set since the last detection. This time is reset every time a new movement is detected.
    • In addition, it incorporates brightness sensor, which can limit the activation of the LED light to the natural light existing at every moment of the day.
    • Application examples: corridors, halls, staircases,…
  • LED PLAFOND WITH MOVEMENT DETECTOR – DM HF1 PL1

    • LED Plafond with high frecuency movement detector.
    • Detection is possible across gates, windows, walls… It means that is necessary to adjust wanted coverage area.
    • Surface ceiling or wall installation.
    • Power: 12W.
    • Time Delay, brightness and sensitivity can be adjusted by DIPs.
    • Maximum coverage of 360º and Ø10m, at 2.5m high and 20ºC ∼ 25ºC.
    • Application Examples: corridors, hallways, vestibules, etc…
  • LED PLAFOND WITH MOVEMENT DETECTOR – DM HF1 PL2

    • LED Plafond with high frecuency movement detector.
    • Detection is possible across gates, windows, walls… It means that is necessary to adjust wanted coverage area.
    • Surface ceiling or wall installation.
    • Power: 18W.
    • Time Delay, brightness and sensitivity can be adjusted by DIPs.
    • Maximum coverage of 360º and Ø10m, at 2.5m high and 20ºC ∼ 25ºC.
    • Application Examples: corridors, hallways, vestibules, etc…
    • Incorporing high frequency movement detector (RADAR).

ACCESSORIES

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies