MODULAR DIMMER WITH BUILT-IN POTENTIOMETER – RE EL1 LE3

Descripción

Modular dimmer with built-in dimming potentiometer.
IGBT technology: leading-edge or trailing-edge dimming.
Valid for:
– Dimmable 230V LED lamps.
– Dimmable 12V LED lamps with electronic transformer.
– Incandescent and 230V Halogens lamps.
– 12V Halogen lamps with electronic transformer.
Modular housing, DIN-rail mounting.
Control bu Pushbutton or built-in Potentiometer.
Up to 3 lighted pushbuttons and a unlimited number of non-lighted ones can be connected.
The front potentiometer allows dimming from the dimmer itself, without the need of an external push button.
The minimum brightness level can be adjusted by using the selector knob. It avoids flickers or malfunctions in the lamps.
Three operation modes:
– Memory: by a brief press, the lamps are switched-on at the previous level before the last turn-off.
– No Memory: by brief press, the lamps are switched-on at maximum level.
– Auto: like Memory-mode. In addition, it has status memory after a cut-off from mains.
Master/slave configuration: it allows increasing the load capacity.
Protected against overload. short-circuit and over-heat.

Características técnicas

Product reference RE EL1 LE3
Power Supply (V) 230VCA
Frequency (Hz) 50/60
Consumption 3VA
Output channels 1
Maximum power (VA) 0
Type of load Dimmable LED lamps
Dimmable 230V LED lamps (leading edge) 4W ~ 80W
Dimmable 230V LED lamps (trailing edge) 4W ~ 300W
Dimmable 12V LED lamps with electronic transformer 6 transfo of 50W and 1 lamp per transfo or 3 transfo of 100W and 1 lamp per transfo
Incandescent and Halogen 230V (W) 300
Halogen lamps with ferromagnetic trafo (W 0
12V Halogen with electronic transformer (W) 300
Maximum current input 1/10VDC (mA) 0
Maximum Number of Equipments 0
Control Pushbutton or incorporated potentiometer
Maximum number of lighting pushbuttons 3
Module number 1
Connection terminals Captive Screws
Cable section (mm2) 4
Minimum Storage Temperature (ºC) (min) -30
Maximum Storage Temperature (ºC) (max) 70
Installation DIN Rail
Minimum Working Temperature (ºC) (min) 0
Maximum Working Temperature (ºC) (max) 40
Protection Degree IP20, UNE 20324

Esquema de instalación

MODULAR DIMMER WITH BUILT-IN POTENTIOMETER – RE EL1 LE3 - Esquema de instalación - Dinuy
MODULAR DIMMER WITH BUILT-IN POTENTIOMETER – RE EL1 LE3 - Esquema de instalación - Dinuy

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies