KNX – TWISTED PAIR (KNX-TP)

POWER SUPPLY

FA KNT 001
  • Power supply of 640mA , to generate and monitor power Bus EIB / KNX.
  • The bus line is isolated from the network by the coil.
  • There is a second auxiliary output not isolated from the network.
  • Programing by ETS: program ETS3.
  • Download Instructions.

TRANSMITTERS / SENSORS

EM KNT 001
  • It has 4 independent channels , which can function as binary inputs or outputs , depending on how parametricen by ETS software.
  • This device can be used as buttons or switches interface for reading binary input or as an output for display using LEDs.
  • Power supplied by the Bus.
  • Each of the four channels has the following functions: switching, dimming , blinds control , Scene Control , Pulse Count , LED display , etc.
  • Programing by ETS: programa ETS4.
  • Download Instructions.
  • Download User Guide.
EM KNT 002
  • It has 4 independent channels, which can function as binary or analog inputs, depending on how parametricen by ETS software.
  • This device can be used as interface buttons or switches, for reading binary inputs or as analog temperature sensor input (with external probe).
  • Power supplied by the Bus.
  • Each of the four channels has the following functions: switching, dimming, blinds control, Scene Control, Pulse Count, temperature control, thermostat, etc.
  • Programing by ETS: program ETS4.
  • Download Instructions.
  • Download User Guide.
DM KNT 001
  • Infrared Movement detector.
  • Mounting in false ceiling.
  • Functions: Motion detection, constant light control, Twilight switch, light or temperature sensor.
  • Power supplied by the Bus.
  • Coverage: Ø7m to 2.5m high.
  • Programing by ETS: program ETS3 / program ETS4
  • Download Instructions.
  • Download User Guide.
DM KNT 002
  • Detector de movimiento por Infrarrojos
  • Montaje en superficie
  • Funciones: Detección de movimiento, Control constante de iluminación, Interruptor crepuscular, Sensor de luminosidad o temperatura
  • Alimentación del Bus
  • Cobertura: 180º / 10m
  • Programación por ETS: programa ETS3 / programa ETS4
  • Descargar Instrucciones de montaje

 

RECEIVERS / ACTUATORS

RE KNT DA1
  • 1-channel modular DALI dimming actutor (up to 64 equipments).
  • Protected against overloads and short-circuits. Built-in heating protection.
  • Anti-panic input for safety systems.
  • Installation in DIN rail.
  • Power supply 230V.
  • Programinf by ETS: program ETS3 / program ETS4
  • Download Instructiones.
  • Download User Guide.
RE KNT 110
  • 1-channel modular 1-10VDC dimming actuator (up to 200 equipments).
  • Protected against overloads and short-circuits. Built-in heating protection.
  • Anti-panic input for safety systems.
  • Installation in DIN rail.
  • Power supply 230V.
  • Programing by: program ETS3 / program ETS4.
  • Download Instrucciones.
RE KNT RGB
  • Dimming actuator to control RGBW LED strips .
  • Power supply:12Vcc – 24Vcc.
  • It has 4 output channels 16A per channel , with a maximum capacity of 32A.
  • Control via KNX PT ( Twisted Pair to 24VDC ).
  • Protected against overloads and short-circuits.
  • Formato modular, para su instaación sobre carril DIN.
  • Anti-panic input for safety systems.
  • Programing by ETS4 Programa ETS4.

 

IT KNT 001
  • 1-channel blinds actuator or 2-channel switch.
  • Up to 16A switching capacity per channel.
  • Power supplied by the Bus.
  • Possibility of manual operation from the device.
  • Installation in DIN rail.
  • Programing by ETS: program ETS3 / program ETS4.
  • Download Instructiones.
IT KNT 004
  • A4-channel switching actuator.
  • Maximun load: 16A per channel.
  • Installation in DIN rail.
  • Power supplied by the Bus.
  • Programing by ETS3 or later: program ETS3.
  • Download Instructiones.
IT KNT 012
  • A12-channel switching actuator.
  • Maximun load: 16A per channel.
  • Installation in DIN rail.
  • Power supplied by the Bus.
  • Programing by ETS3 or later: program ETS3.
  • Download Instructions.

COMUNICACIÓN

CO KNX 002
  • ARF-KNX / KNX- PT media coupler.
  • Interface between wireless and twisted-pair devices.
  • It allows the transmission of telegrams from the radio modules to KNX Bus devices and vice versa (bidirectional communication).
  • Can be used together with devices to control lighting, HVAC, blinds/shutters and main purpose devices.
  • Up to 16 bidirectional RF or TP independent channels.
  • Power supply: BUS KNX 24VDC.
  • Programing by ETS: programa ETS3
  • Download Instructions.
  • Downsload User Guide.

 

CO KNT 001
  • Communication interface between DINUY dimmers and any KNX-TP compatible divice.
  • Al the moment that receives a signal from a sensor transmits the order to the dimmer, being possible to control almost any type of load.
  • Compatible with all DINUY modular dimmers. Unidirectional communication.
  • It allows switching ON/OFF, Dim and save or recall up to 8 lighting scenes.
  • Installation in DIN rail.
  • Power supply: BUS KNX 24VDC.
  • Programing by ETS: : program ETS3.
  • Download Instructiones.
  • Download User Guide.
CO KNT 002
  • KNX USB Interface Stick.
  • Establishes a bidirectional connection between a PC and the KNX installation bus.
  • Galvanic separation from the KNX bus.
  • Both ETS versions ETS3 or later and some visualization tools supports this interface..
  • Download Instructiones

.

ACCESORIO

ST KNT 001
  • NTC temperature probe for EM KNT 002 sensor.
  • Probe length: 3 meters.

 

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies