MOTION DETECTOR – DM KNX 001
Description
Wireless flush-ceiling mounted Infrared PIR motion detector for lighting, heating and air conditioning control.
Built-in light sensor, allowing to limit the operation of the detector to daylight.
It has 2 operation modes:
Motion detector: useful for lighting control. The time delay must be set on the actuator. Compatible with the actuators: IT KNX 001, MI KNX 001 and CO KNX 002.
Presence detector: useful for heating and air conditioning control.
Compatible with the actuators: TM KNX 001 and CO KNX 002.
Incorporates Temperature sensor.
Coverage: 360º and Ø7m at 2.5 high.
Battery-operated, 1 x 3V Lithium battery LS14250. Useful life higher than 4 years.
Radio-frequency: 868,4MHz.
Technical characteristics
| Product reference | DM KNX 001 |
| Power Supply (V) | 1 batería 3,6V LS14250 |
| Battery life | > 4 años (50 det/día) |
| Output channels | 1 |
| Maximum Number of Equipments | 0 |
| Detecting angle (º) | 360 |
| Mounting height (m) | 2.5 |
| Coverage diameter (m) | 7 |
| Start up | Easy Mode |
| Maximum number of extra movement sensor | 0 |
| Maximum Time setting (minutes) | 0 |
| Minimum Brightness level (lux) (min) | 5 |
| Maximum Brightness level (lux) (max) | 100 |
| Tecnology | Infrareds (PIR) |
| Mounting | Flush ceiling |
| Admits contactor | No |
| Zero crossing point | No |
| Compatible with | KNX-RF Easy Mode |
| Radiofrequency | 868,3MHz |
| Maximum coverage (m) | 100 |
| Minimum Working Temperature (ºC) (min) | -5 |
| Maximum Working Temperature (ºC) (max) | 45 |
| Protection Degree | IP20, Class II |