THERMOSTAT – TM KNX 001
Wireless 1-channel Thermostat actuator for HVAC control.
It incorporates a potentiometer which allows setting the desired temperature avoiding any undesired manipulation.
Every time it receives a signal of temperature from the sensor it will be compared with the already set in the thermostat and will act accordingly on its relay.
It also can receive telegrams from door/window contacts or presence detectors.
Up to 16A switching capacity with free-voltage relay.
Incorporates RF signal repeater function, which can be enabled or disabled as needed.
Modular installation device. DIN-rail mounting. 1-module wide.
Range: up to 100m (in the free field).
Compatible with: SE KNX 001, SE KNX 003, SE KNX 004, DP KNX 001 & CO KNX 002.
|Product reference||TM KNX 001|
|Power Supply (V)||230VCA|
|Switching capacity (A)||16|
|Type of load||1 Switch channel|
|LED lamps load (W)||400|
|Incandescent and Halogen 230V (W)||3000|
|12V Halogen with electronic transformer (W)||3000|
|Halogen lamps with ferromagnetic trafo (W||500|
|Maximum current input 1/10VDC (mA)||0|
|Maximum Number of Equipments||0|
|Compatible with||KNX-RF Easy Mode|
|Maximum coverage (m)||100|
|Connection terminals||Captive Screws|
|Cable section (mm2)||2.5|
|Minimum Storage Temperature (ºC) (min)||-30|
|Maximum Storage Temperature (ºC) (max)||70|
|Minimum Working Temperature (ºC) (min)||-5|
|Maximum Working Temperature (ºC) (max)||45|
|Protection Degree||IP20 , UNE 20324|