Modular Dimer for 1/10V Control Gears
DIMMER FOR 1-10V DRIVERS OR BALLASTS – RE PLA 010
• Dimmer for 1-10V Drivers or Ballasts with LED or Fluorescence lighting.
• Control by conventional Pushbuttons: short press – On/Off and Sustained press – Dimming.
• Memory function: when switching-on by the pushbutton, the luminaires return to the same level as they had before they were switched-off.
• Puck housing. Junction-box mounting.
• Incorporates a relay that allows the physical disconnection of the lighting fixtures.
• Possibility of adjusting the dimming speed while the pushbutton is pressed.
MODULAR DIMMER FOR 1-10V DRIVERS – RE EL5 002
• Modular Dimmer for 1-10V Drivers or Ballasts.
• Control by conventional Pushbutton, Potentiometer (built-in or external) or 0-10V or 1-10V Signal.
• incorporates a relay which disconnects the supply of the Drivers.
• DIN-rail mounting. 5 modules wide.
• Anti-panic input for safety systems: in case of emergency the lamps can be switched on at maximum level without considering the dimming control.
• Master/Slave configuration, allowing increasing the load capacity from only one control, dividing the load in different dimmers.
WIRELESS DIMMER FOR 1-10V DRIVERS – RE KNX 010
• Wireless Dimmer for 1-10V Ballast or LED Driver, for example, Fluorescence or LED lighting fixtures.
• Can control up to a maximum of 100 equipments.
• Junction-box mounting.
• Control by RF-KNX transmitter (remote control, pushbutton,…) or wired Pushbutton.
• Resettable protection against overloads, short-circuits and over-heating.
• Compatible with several transmitters: EM KNX 002, PU KNX 001 and RC KNX 001.
• Maximum range of up to 100m (in free field).