Incandescent & Halogen Lamps

IGBT dimmer for Incandescent and Halogen lamps (R, L or C loads)
Valid for: Incandescence, 230V Halogens, 12V Halogens with ferromagnetic or electronic transformer
Leading-edge or Trailing-edge dimming, automatic load detection
Universal box flush mounting
Pushbutton control
Memory function
Maximum load: 400W

• TRIAC dimmer for Incandescent and Halogen lamps (R or L loads)
• Valid for: Incandescence, 230V Halogens, 12V Halogens with ferromagnetic or electronic transformer (type L).
• Leading-edge dimming.
• Universal box flush mounting.
• Pushbutton control.
• Memory function.
• Maximum load: 500W.

IGBT dimmer for Incandescent and Halogen lamps (R, L or C loads)
Valid for: Incandescence, 230V Halogens, 12V Halogens with ferromagnetic or electronic transformer
Leading-edge or Trailing-edge dimming, automatic load detection
DIN-rail mounting
Control by: pushbutton, 0-10Vdc signal or potentiometer
Memory function
Master/Slave function which allows increasing the load capacity
Maximum load: 1000W

• TRIAC regulator in tablet format, developed for the control of 12V or 230V Incandescent and Halogen lamps,
• Compatible with:
– Incandescence and Halogens 230V.
– 12V halogen with ferromagnetic transformer.
– 12V halogen with electronic transformer (type L).
• Control by means of conventional pushbuttons: short pressings turn on / off and long pressings regulate.
• Memory function
• Mounting in a register box.
• Protected against overheating with non-resettable thermal protector.

Leading and trailing edge dimmer, depending on the load (R, L, C):
Controls:
– Pushbutton with or without memory.
– Potentiometer (external or by built-in one).
– 0/10Vdc signal.
Protected against overload, short-circuit and overheat.
Anti-panic input for safety systems.
Master/Slave configuration; allowing to increase the load, distributing it in different dimmers with a single control.

TRIAC dimmer for Incandescent and Halogen Lamps (R or L loads).
Valid for: Incandescence, 230V Halogens, 12V Halogens with ferromagnetic or electronic transformer (type L).
Leading-edge dimming.
DIN-rail mounting.
Control by: pushbutton, 0/10Vdc signal or potentiometer (built-in or external).
Memory function.
Master/Slave function which allows increasing the load capacity.
Maximum loas: 3000W.

• Leading-edge dimmerfor RL load: incandescent or halogen lamps
• Control by:
– Pushbutton with or without memory.
– Potentiometer (external or by built-in one).
– 0/10Vdc signal.
• Protected against overload, short-circuit and overheat.
• Anti-panic input for safety systems.
• Master/Slave configuration; allowing to increase the load, distributing it in different dimmers with a single control.