DALI Control Gears
-
DIMMER FOR DALI DRIVERS OR BALLASTS – RE PLA DA1
• Small Dimmer for DALI Ballast or LED Driver, for example, Fluorescencia or LED lighting fixtures.
• Broadcast DALI communication.
• Can control up to a maximum of 64 equipments.
• Junction-box mounting.
• Control by Pushbutton, with or without Memory.
• Resettable protection against overloads, short-circuits and over-heating. -
MODULAR DIMMER FOR DALI DRIVERS OR BALLASTS – RE EL5 DA1
• Modular Dimmer for DALI Drivers or Ballasts.
• Broadcasting DALI communication (only 1 group). It is not addressable.
• Up to 128 Drivers can be controlled.
• Control:
– Pushbutton:With Memory: the lamps are switched on at the previous level before beings witched-off.
Without Memory: the lamps are switched on at maximum level.
Auto: the lamps are switched on at the previous level before being switched-off and the dimmer recovers the same situation if there is a cut-off of the mains.– Potentiometer, external or built-in one.
– 0-10V or 1-10V Signal.• Modular housing, with a width of 5 modules (87,5mm). DIN-rail mounting.
• Anti-panic input for safety systems: in case of emergency the lamps can be switched on at maximum level without considering the dimming control.
• Master/Slave configuration, allowing increasing the load capacity from only one control, dividing the load in different dimmers. -
WIRELESS DIMMER FOR DALI BALLAST OR DRIVER – RE KNX DA1
• Wireless Dimmer for DALI Ballast or LED Driver, for example, Fluorescence or LED lighting fixtures.
• Can control up to a maximum of 64 DALI equipments.
• DALI Broadcast communication.
• Control by wireless RF-KNX transmitter (remote control, pushbutton,…) or wired Pushbutton.
• Built-in selector switch which allows to set the minimum dimming level.
• Resetteable protection against overloads, short-circuits and over-heating.
• Junction-box mounting.
• Compatible with: EM KNX 002, PU KNX 001, RC KNX 001 & CO KNX 002.
• Maximum range of up to 100m (in free field).