MODULAR DIMMER FOR DALI DRIVERS OR BALLASTS – RE EL5 DA1
Description
• Modular Dimmer for DALI Drivers or Ballasts.
• Broadcasting DALI communication (only 1 group). It is not addressable.
• Up to 128 Drivers can be controlled.
• Control:
– Pushbutton:
With Memory: the lamps are switched on at the previous level before beings witched-off.
Without Memory: the lamps are switched on at maximum level.
Auto: the lamps are switched on at the previous level before being switched-off and the dimmer recovers the same situation if there is a cut-off of the mains.
– Potentiometer, external or built-in one.
– 0-10V or 1-10V Signal.
• Modular housing, with a width of 5 modules (87,5mm). DIN-rail mounting.
• Anti-panic input for safety systems: in case of emergency the lamps can be switched on at maximum level without considering the dimming control.
• Master/Slave configuration, allowing increasing the load capacity from only one control, dividing the load in different dimmers.
Technical characteristics
Product reference | RE EL5 DA1 |
Power Supply (V) | 230VCA |
Frequency (Hz) | 50 |
Consumption | 3W |
Output channels | 1 |
Switching capacity (A) | 16 |
Maximum power (VA) | 0 |
Type of load | Ballast or Driver DALI |
Maximum current input 1/10VDC (mA) | 0 |
Maximum Number of Equipments | 128 |
Control | Pushbutton, Potentiometer or 0/10VDc signal |
Maximum number of lighting pushbuttons | 3 |
Module number | 5 |
Connection terminals | Captive Screws |
Cable section (mm2) | 6 |
Minimum Storage Temperature (ºC) (min) | -30 |
Maximum Storage Temperature (ºC) (max) | 70 |
Installation | DIN Rail |
Minimum Working Temperature (ºC) (min) | 0 |
Maximum Working Temperature (ºC) (max) | 40 |
Protection Degree | IP20, UNE 20324 |
According with Directives | 2014/35/EU LV; 2014/30/EU EMC; 2011/65/EU RoHS |
According to the Standard | UNE-EN 60669-1:2018; UNE-EN 60669-2-1:2005, +erratum:2008, +/A1:2010, +/A12:2011; UNE-EN 60669-2-3:2007 |
Dimensions

Installation scheme
