IMPULSE RELAY – TE UNI 220
Description
• Impulse relay with 1 NO free-voltage contact.
• Installation in mechanism box.
• The output contact changes the status when the coil is supplied through thepushbutton. That is, a press closes its contact and the next press opens it.
• Unlike a contactor, the coil of the switch does not remain under voltage andthere is no permanent power consumption.
• Screw terminal connections.
• Very low sound level, so silence.
• Application examples: hotel and hospitals rooms, homes, corridors,…
Technical characteristics
| Product reference | TE UNI 220 |
| Power Supply (V) | 230VCA |
| Frequency (Hz) | 50 |
| Switching capacity (A) | 10 |
| LED lamps load (W) | 400 |
| Incandescent and Halogen 230V (W) | 2.000 |
| 12V Halogen with electronic transformer (W) | 1.000 |
| Fluorescent lamps load(W) | 600 |
| Mounting | Mechanism box |
| Contacts | NA unipolar switch |
| Admits contactor | Yes |
| Zero crossing point | Yes |
| Lighted pushbuttons | Hasta 3 (hasta 10 con AC DM- 003) |
| Voltage-free contacts | Yes |
| Coil consumption | Working: 0W Pressing: 50mW |
| Minimum impulse time (sec) | 0.05 |
| Minimum time between impulse | 0,1sec (20 per minute maximum) |
| Electric lifetime | Máximum Load: > 200.000 cycles |
| Mechanic lifetime | > 1 million cycles |
| Room temperature (ºC) (min) | -20 |
| Room temperature (ºC) (max) | 45 |
| Protection Degree | IP20, Class II |
Dimensions
Installation scheme
