KNX RF USB Stick- CO K5X 001

Compact USB

Description

  • The KNX RF/TP Coupler is a compact KNX radio coupler.
  • It connects KNX RF devices of a radio line with the KNX Bus Twisted Pair.
  • The device has a filter table (8k byte). The coupler supports long frames and is compatible with the ETS® software ETS5 or higher.
  • The buttons on the front panel allow disabling the telegram filter for testing purposes.
  • The LEDs indicate operating conditions as well as communication errors on the KNX bus.
  • The power is supplied via the KNX bus (main line).

Technical Features

Reference CO K5X 001
Power supply  < 50 mA
RF Interface KNX RF, ISM Band 868,3 MHz, FSK/ Output power <10mW
Mechanical Data Housing: Transparent plastic (ABS)
Dimensions 71 x 23 x 8,7mm
Mounting Use indoor areas only, it can be connected directly to a USB port of a PC or Laptop.
Connectors Connector for KNX Bus

Internal antenna

Protection Degree Ambient temp. operating: – 5 … + 45 °C

Ambient temp. non-op.: – 25 … + 70 °C

Rel. humidity (non-condensing): 5 % … 93 %

Security Protection (acc. EN 60529): IP 20
According to the Standard Low voltage directive 2014 / 35 / EU

EMC directive 2014 / 30 / EU

Radio equipment directive 2014 / 53 / EU

RoHS directive 2011 / 65 / EU (RoHS2)

EN 50491-3: 2009

EN 50491-5-1: 2010

EN 50491-5-2: 2010

EN 50491-5-3: 2010

EN 61000-6-2: 2005

EN 61000-6-3: 2007 + A1: 2011

EN 300 220-2: V3.1.1

EN 50581: 2012 (RoHS2)

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies