Receptors/Actuators

Showing 1–9 of 10 results

  • 1-CHANNEL SWITCHING ACTUATOR – IT KNX 001

    • Wireless 1-channel Switch actuator for general purpose.
    • Up to 16A switching capacity with non-free voltage output.
    • Two different operation modes:
    – Switch ON/OFF.
    – Timer: 3sec ~ 5min.
    • Incorporates RF signal repeater function, which can be enabled or disabled as needed.
    • A conventional pushbutton can be wired for local control.
    • DIN-rail mounting.
    • Dimensions: 1 module wide.230V-operated.
    • Radio-frequency: 868,4MHz.
    • Range: up to 100m (in the free field).
    • Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

  • 1-CHANNEL SWITCH ACTUATOR – MI KNX 001

    Wireless 1-channel Switch actuator for general purpose.
    Up to 16A switching capacity with non-free voltage output.
    Two different operation modes:
    · Switch ON/OFF.
    · Timer: 3sec ~ 5min.Incorporates RF signal repeater function, which can be enabled or disabled as needed.
    A conventional pushbutton can be wired for local control.Junction box mounting.
    Dimensions: 46 x 46 x 30mm. 230V-operated.
    Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

  • 2-CHANNEL SWITCH OR 1-CHANNEL BLIND/SHUTTER ACTUATOR – PE KNX 001

    • Wireless 1-channel blind/shutter actuator or 2-channel switching actuator.
    • Up to 16A switching capacity per channel with 2 free-voltage outputs.
    • Incorporates RF signal repeater function, which can be enabled or disabled as needed.
    • Includes 2 auxiliary inputs which allow the local control.
    • Dimensions: 107 x 53 x 34mm.
    • 230V-operated.
    • Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 002 & CO KNX 002.
  • THERMOSTAT – TM KNX 001

    Wireless 1-channel Thermostat actuator for HVAC control.
    It incorporates a potentiometer which allows setting the desired temperature avoiding any undesired manipulation.
    Every time it receives a signal of temperature from the sensor it will be compared with the already set in the thermostat and will act accordingly on its relay.
    It also can receive telegrams from door/window contacts or presence detectors.
    Up to 16A switching capacity with free-voltage relay.
    Incorporates RF signal repeater function, which can be enabled or disabled as needed.
    Modular installation device. DIN-rail mounting. 1-module wide.
    230V-operated.
    Radio-frequency: 868,4MHz.
    Range: up to 100m (in the free field).
    Compatible with: SE KNX 001, SE KNX 003, SE KNX 004, DP KNX 001 & CO KNX 002.

  • WIRELESS DIMMER FOR LED LAMPS – RE KNX LE1

    • Wireless Dimmer for LED lamps.
    • Leading or Trailing edge dimming technology:

    – Leading-edge dimmable 230V LED lamps.
    – Trailing-edge dimmable 230V LED lamps.
    – Dimmable 12V LED lamps with electronic transformer.
    – Incandescent and 230V Halogen lamps.
    – LV Halogen lamps with electronic transformer.

    • Power capacity of up to 250W, depending on the type of lamp.
    • A conventional Pushbutton can be wired.
    • Junction-box mounting.
    • Compatible with: EM KNX 002, PU KNX 001, RC KNX 001 & CO KNX 002.
    • Maximum range of up to 100m (in free field).

  • WIRELESS DIMMER FOR SINGLE-COLOR LED STRIPS – RE KNX LE2

    • Wireless 1-channel Dimmer for 12V-48V single-color LED Strips.
    • Pulse Width Modulation (PWM) dimming technology.
    • Up to 8A dimming capacity (12V: 96W // 24V: 192W).
    • A conventional pushbutton can be wired.
    • Junction box mounting. Dimensions: 55 x 53 x 34mm.
    • Memory function.
    • Compatible with: EM KNX 002, PU KNX 001, RC KNX 001 and CO KNX 002.
    • Maximum range of up to 100m (in free field).

  • WIRELESS DIMMER FOR SINGLE-COLOR LED STRIPS – RE KNX LE3

    • Wireless 1-channel Dimmer for 12V-48V single-color LED Strips.
    • Pulse Width Modulation (PWM) dimming technology.
    • Up to 4A dimming capacity (12V: 48W // 24V: 96W).
    • Memory function.
    • Compatible with: EM KNX 002, PU KNX 001, RC KNX 001 and CO KNX 002.
    • Maximum range of up to 100m (in free field).

  • WIRELESS DIMMER FOR RGB LED STRIPS – RE KNX RGB

    • Dimmer for 3-channels RGB 12-48V LED strips.
    • PWM dimming technology.
    • Control by RF remote control: RC KNX 001.
    • Maximum load of up to 5A/channel
    • Maximum range of up to 100m (in free field).

  • WIRELESS DIMMER FOR 1-10V DRIVERS – RE KNX 010

    • Wireless Dimmer for 1-10V Ballast or LED Driver, for example, Fluorescence or LED lighting fixtures.
    • Can control up to a maximum of 100 equipments.
    • Junction-box mounting.
    • Control by RF-KNX transmitter (remote control, pushbutton,…) or wired Pushbutton.
    • Resettable protection against overloads, short-circuits and over-heating.
    • Compatible with several transmitters: EM KNX 002, PU KNX 001 and RC KNX 001.
    • Maximum range of up to 100m (in free field).

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies