Wireless Solutions - Radiofrequency

Showing 1–9 of 17 results

  • 1-CHANNEL SWITCHING ACTUATOR – IT KNX 001

    • Wireless 1-channel Switch actuator for general purpose.
    • Up to 16A switching capacity with non-free voltage output.
    • Two different operation modes:
    – Switch ON/OFF.
    – Timer: 3sec ~ 5min.
    • Incorporates RF signal repeater function, which can be enabled or disabled as needed.
    • A conventional pushbutton can be wired for local control.
    • DIN-rail mounting.
    • Dimensions: 1 module wide.230V-operated.
    • Radio-frequency: 868,4MHz.
    • Range: up to 100m (in the free field).
    • Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

  • 1-CHANNEL SWITCH ACTUATOR – MI KNX 001

    Wireless 1-channel Switch actuator for general purpose.
    Up to 16A switching capacity with non-free voltage output.
    Two different operation modes:
    · Switch ON/OFF.
    · Timer: 3sec ~ 5min.Incorporates RF signal repeater function, which can be enabled or disabled as needed.
    A conventional pushbutton can be wired for local control.Junction box mounting.
    Dimensions: 46 x 46 x 30mm. 230V-operated.
    Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

  • COMMUNICATION KNX RF/TP GATEWAY – CO KNX 002

    The Media Coupler connects wireless KNX devices (KNX-RF) with the KNX Bus (KNX-TP).
    Therefore wired actuators can be controlled by wireless sensors as well as wireless actuators can be controlled by wired transmitters (bidirectional communication).
    Can be used together with devices to control lighting, HVAC, blinds/shutters and main purpose devices.In addition to its function as media coupler, the device can also be used as a KNX-RF repeater to increase the wireless range within a KNX-RF wireless system.
    Commissioning by ETS4 or later version.
    Dimensions: 78 x 28 x 23mm.
    It is installed in a flush-mounted device box and obtains its power supply via the KNX bus line.

  • 2-CHANNEL SWITCH OR 1-CHANNEL BLIND/SHUTTER ACTUATOR – PE KNX 001

    • Wireless 1-channel blind/shutter actuator or 2-channel switching actuator.
    • Up to 16A switching capacity per channel with 2 free-voltage outputs.
    • Incorporates RF signal repeater function, which can be enabled or disabled as needed.
    • Includes 2 auxiliary inputs which allow the local control.
    • Dimensions: 107 x 53 x 34mm.
    • 230V-operated.
    • Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 002 & CO KNX 002.
  • MOTION DETECTOR – DM KNX 001

    Wireless flush-ceiling mounted Infrared PIR motion detector for lighting, heating and air conditioning control.
    Built-in light sensor, allowing to limit the operation of the detector to daylight.
    It has 2 operation modes:
    Motion detector: useful for lighting control. The time delay must be set on the actuator. Compatible with the actuators: IT KNX 001, MI KNX 001 and CO KNX 002.
    Presence detector: useful for heating and air conditioning control.
    Compatible with the actuators: TM KNX 001 and CO KNX 002.
    Incorporates Temperature sensor.
    Coverage: 360º and Ø7m at 2.5 high.
    Battery-operated, 1 x 3V Lithium battery LS14250. Useful life higher than 4 years.
    Radio-frequency: 868,4MHz.

  • THERMOSTAT – TM KNX 001

    Wireless 1-channel Thermostat actuator for HVAC control.
    It incorporates a potentiometer which allows setting the desired temperature avoiding any undesired manipulation.
    Every time it receives a signal of temperature from the sensor it will be compared with the already set in the thermostat and will act accordingly on its relay.
    It also can receive telegrams from door/window contacts or presence detectors.
    Up to 16A switching capacity with free-voltage relay.
    Incorporates RF signal repeater function, which can be enabled or disabled as needed.
    Modular installation device. DIN-rail mounting. 1-module wide.
    230V-operated.
    Radio-frequency: 868,4MHz.
    Range: up to 100m (in the free field).
    Compatible with: SE KNX 001, SE KNX 003, SE KNX 004, DP KNX 001 & CO KNX 002.

  • WIRELESS DIMMER FOR LED LAMPS – RE KNX LE1

    • Wireless Dimmer for LED lamps.
    • Leading or Trailing edge dimming technology:

    – Leading-edge dimmable 230V LED lamps.
    – Trailing-edge dimmable 230V LED lamps.
    – Dimmable 12V LED lamps with electronic transformer.
    – Incandescent and 230V Halogen lamps.
    – LV Halogen lamps with electronic transformer.

    • Power capacity of up to 250W, depending on the type of lamp.
    • A conventional Pushbutton can be wired.
    • Junction-box mounting.
    • Compatible with: EM KNX 002, PU KNX 001, RC KNX 001 & CO KNX 002.
    • Maximum range of up to 100m (in free field).

  • TEMPERATURE SENSOR – SE KNX 001

    Wireless Temperature value transmitter.
    Sends the temperature value measured in the place when:
    · The temperature value changes more than ±0,5ºC.
    · 60 minutes after the last transmission.
    · Pressing the inside link key.
    Dimensions: 78 x 28 x 23mm.
    Portable or wall fix mounted.
    Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
    Radio-frequency: 868,4MHz.
    Range: up to 100m (in the free field).
    Compatible with: TM KNX 001 & CO KNX 002.

  • WIRELESS DIMMER FOR SINGLE-COLOR LED STRIPS – RE KNX LE2

    • Wireless 1-channel Dimmer for 12V-48V single-color LED Strips.
    • Pulse Width Modulation (PWM) dimming technology.
    • Up to 8A dimming capacity (12V: 96W // 24V: 192W).
    • A conventional pushbutton can be wired.
    • Junction box mounting. Dimensions: 55 x 53 x 34mm.
    • Memory function.
    • Compatible with: EM KNX 002, PU KNX 001, RC KNX 001 and CO KNX 002.
    • Maximum range of up to 100m (in free field).

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies