Motion Detectors for Wired Installations

Showing 1–9 of 38 results

  • HIGH FRECUENCY MOVEMENT DETECTOR – DM HF1 000

    • High frecuency (radar) Movement Detector, hidden instalation. Its emits a high-frecuency electromangnetic wave 5.8Hz and receives its echo.
    • Sensor detects the change in echo from movement in its detection zone. A microprocessor then triggers the switch light ON command.
    • High-frecuency output of this sensor is < 0,2mW: approximately just 1% of the transmission power of a mobile telephone or the output of a microwave oven. 
    • Time delay, brightness level and sensitivity are adjustable by DIPs.
    • Coverage of 360º and Ø12m of high and 20ºC ∼ 25ºC.
    • Valid for all type of lamps, including LEDs and Fluorescent.
    • Application Examples: Public bathrooms, elevators, etc.

  • Presence detector ceiling mounting – DP TEC 001

    • Presence detector, with PIR technology, for surface installation on ceilings, indoors.
    • Timing and brightness level adjustable by means of potentiometers.
    • Brightness Range: 5 Luxes – 2,000 Luxes.
    • Timing: 6 seconds – 30 minutes.
    • Maximum coverage of 360º and Ø7m, at 2.5m height.
    • Incorporates a 16A relay and switching control in zero crossing, which allows the protection of your relay.
    • Valid for all types of lamps, including LEDs and Fluorescence.
    • The measurement of the luxes is made and constantly compared with the adjusted set point regardless of whether the detector output is active or not, that is, the presence detector measures the luxes constantly whether or not the lights are on and if the value is already greater than the adjusted value will turn off the lights despite continuing to detect movement. (THE ARTIFICIAL LIGHT DOES NOT KEEP IN MIND WHEN COMPARING)

  • Presence detector ceiling mounting – DP TEC 01N

    • Presence detector, with PIR technology, for surface installation on ceilings, indoors.
    • Timing and brightness level adjustable by means of potentiometers.
    • Brightness Range: 5 Luxes – 2,000 Luxes.
    • Timing: 6 seconds – 30 minutes.
    • Maximum coverage of 360º and Ø7m, at 2.5m height.
    • Incorporates a 16A relay and switching control in zero crossing, which allows the protection of your relay.
    • Valid for all types of lamps, including LEDs and Fluorescence.
    • The measurement of the luxes is made and constantly compared with the adjusted set point regardless of whether the detector output is active or not, that is, the presence detector measures the luxes constantly whether or not the lights are on and if the value is already greater than the adjusted value will turn off the lights despite continuing to detect movement. (THE ARTIFICIAL LIGHT DOES NOT KEEP IN MIND WHEN COMPARING)

  • Presence detector ceiling mounting – DP TEC 01P

    • Presence detector, with PIR technology, for surface installation on ceilings, indoors.
    • Timing and brightness level adjustable by means of potentiometers.
    • Brightness Range: 5 Luxes – 2,000 Luxes.
    • Timing: 6 seconds – 30 minutes.
    • Maximum coverage of 360º and Ø7m, at 2.5m height.
    • Incorporates a 16A relay and switching control in zero crossing, which allows the protection of your relay.
    • Valid for all types of lamps, including LEDs and Fluorescence.
    • The measurement of the luxes is made and constantly compared with the adjusted set point regardless of whether the detector output is active or not, that is, the presence detector measures the luxes constantly whether or not the lights are on and if the value is already greater than the adjusted value will turn off the lights despite continuing to detect movement. (THE ARTIFICIAL LIGHT DOES NOT KEEP IN MIND WHEN COMPARING)

  • Presence detector flush ceiling – DP TEC 03N

    • Presence detector, with PIR technology, for recessed ceiling installation, indoors.
    • Timing and brightness level adjustable by means of potentiometers.
    • Brightness Range: 5 Luxes – 2,000 Luxes.
    • Timing: 6 seconds – 30 minutes.
    • Maximum coverage of 360º and Ø7m, at 2.5m height.
    • Incorporates a 16A relay and switching control in zero crossing, which allows the protection of your relay.
    • Valid for all types of lamps, including LEDs and Fluorescence.
    • The measurement of the luxes is made and constantly compared with the adjusted set point regardless of whether the detector output is active or not, that is, the presence detector measures the luxes constantly whether or not the lights are on and if the value is already greater than the adjusted value will turn off the lights despite continuing to detect movement. (THE ARTIFICIAL LIGHT DOES NOT KEEP IN MIND WHEN COMPARING)

  • Presence detector flush ceiling – DP TEC 03P

    • Presence detector, with PIR technology, for recessed ceiling installation, indoors.
    • Timing and brightness level adjustable by means of potentiometers.
    • Brightness Range: 5 Luxes – 2,000 Luxes.
    • Timing: 6 seconds – 30 minutes.
    • Maximum coverage of 360º and Ø7m, at 2.5m height.
    • Incorporates a 16A relay and switching control in zero crossing, which allows the protection of your relay.
    • Valid for all types of lamps, including LEDs and Fluorescence.
    • The measurement of the luxes is made and constantly compared with the adjusted set point regardless of whether the detector output is active or not, that is, the presence detector measures the luxes constantly whether or not the lights are on and if the value is already greater than the adjusted value will turn off the lights despite continuing to detect movement. (THE ARTIFICIAL LIGHT DOES NOT KEEP IN MIND WHEN COMPARING)

  • 1-10V MOTION DETECTOR WITH STAND-BY LEVEL – DM TE1 001

    • Ceiling mounted IR motion detector with stand-by level setting for 1/10Vdc equipments.
    • Surface-ceiling mounting.
    • Coverage: 360º in  ᴓ7m (max. at 2,5m high).
    • Maximun load: 80 1/10V ballasts.
    • Adjustable by remote control (EM MAN DM0).

  • 180º WALL-MOUNTED MOTION DETECTOR – DM SUP 000

    • Wall-mounted PIR Motion Detector.
    • Time delay and Brightness level adjustable by control knobs or IR Remote Control (EM MAN DM0).
    • Sensitivity adjustable only by Remote Control.
    • Coverage angle: 180º max. Coverage distance: 12m max. at 2m high and 20ºC ~ 25ºC.
    • Valid for LED lamps and Fluorescence.
    • Environmental protection: IP44.

  • 3-WIRE MECHANISM BOX-MOUNTING MOTION DETECTOR – DM CAM 001

    • Universal mechanism box mounted IR motion detector.
    • Coverage: 200º in 8m( max.).
    • Time delay, brightness level and sensitivity are adjustable.
    • Maximum load: 3000W. Admits fluorescent and LED lamps.
    • 3-wires installation.

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies