Sensors

Showing all 7 results

  • 2-CHANNEL INPUT PUSHBUTTON KNX-RF INTERFACE – EM K5X 002

    • Wireless KNX-RF S-Mode Pushbutton Interface which allows the control of Switching, Dimming or Blinds Actuators.
    • Incorporates 2 inputs, each of which can be parameterized individually through the ETS:

    • Control of 1 or 2 independent output channels.
    – Function of each input: Switch, Staircase Time Switch, Dimmer, Multiple Switch, Shutter control, Scene control, Fixed value/Forced.

    • The Temperature Sensor incorporates different options that can also be parameterized:

    – Transmission frequency.
    – Over-heating or over-cooling alarms.
    – Temperature sensor calibration.

    • Its small housing allows to be flush mounted into a universal box, behind the pushbutton. Dimensions: 45 x 45 x 12mm.
    • Battery-operated: 2 x 3V Lithium Battery CR2025. Useful life higher than 8 years.
    • Programming and commissioning via ETS5 or later versions.

  • 230V-OPERATED 4-CHANNEL KNX-RF BINARY/ANALOG INPUT – EM K5X 004

    • 230V-operated KNX-RF S-Mode Wireless Transmitter with 4 Binary or Analog Inputs.
    • Each of the 4 inputs can be individually parameterized through the ETS:

    – Binary Input (pushbutton): Switch, Dimmer, Multiple Switch, Sequential Switch, Blinds Control, Scenes Management, Value Transmitter, Pulse Counter.
    – Analog Input: Temperature Sensor, connecting the DINUY probes “ST KNT 001” or “ST KNT 002”.
    – Motion Detector Input: connecting DINUY’s motion detector “DM KNT 004”.

    • Incorporates up to 4 independent Thermostats for the control of Heating and / or Cooling of 4 different zones.
    • Supplied by the 230V mains.
    • Programming and commissioning via ETS5 or later version.

  • KNX-RF WIRELESS TEMPERATURE SENSOR – SE K5X 001

    • Wireless KNX-RF S-Mode Temperature sensor.
    • The Sensor will transmit the value measured by the temperature sensor.
    • The Temperature Sensor incorporates different options that must be parameterized using the ETS:

    – Transmission frequency: according to the time or temperature change.
    – Over-heating or over-cooling alarms.
    – Temperature sensor calibration.
    • Portable or wall mounting.
    • Dimensions: 78 x 28 x 23mm.
    • Battery powered, 2 x 3V CR2032 lithium batteries. Useful life higherthan 8 years.
    • Programming and commissioning by ETS5 or later version.

  • KNX-RF DOOR/WINDOW REED CONTACT SENSOR – SE K5X 003

    • Wireless door/window contact sensor KNX-RF S-Mode for detecting the state (closed/open) of a door or window over the reed contact integrated in the device.
    • The contact sensor incorporates different options that must be parameterized using the ETS:

    – Transmission frequency.
    – Over-heating or over-cooling alarms.
    – Contact polarity (inverted or not inverted).

    • Battery-operated: 2 batteries x 3V CR2032. Useful life highr than 12 years.
    • Programming and commissioning by ETS5 or later version.

  • KNX-RF TEMPERATURE SENSOR WITH PROBE – SE K5X 005

    • Wireless KNX-RF Temperature value transmitter with Probe for heating floors.
    • It sends the temperature value in the place where the probe is installed.
    • Specially-indicated for underfloor heating installations.
    • Includes the following components:

    – Transmitter: captures the value from the temperature probe and transmits it via RF to the linked receiver.
    – Temperature probe: measures the temperature sensed at the tip of the probe. Must be connected directly to the transmitter via its original cable, which is double insulated. Tip of the probe is waterproof.

    • Incorporates KNX-RF signal repeater function.
    • Dimensions: 45 x 42 x 12mm.
    • Supplied by the 230V mains.
    • Programming and commissioning by ETS5 or later version.

  • KNX-RF WIRELESS TEMPERATURE, LUMINOSITY & HUMIDITY MULTI-SENSOR – SE K5X 010

    • Wireless KNX-RF S-Mode Temperature, Luminosity & Relative Humidity Multi-Sensor.
    • The devices incorporates different functions that must be parameterized using the ETS:
    – Temperature sensor: Transmission frequency: according to the time or temperature change. Over-heating or over-cooling alarms. Temperature sensor calibration.
    – Luminosity sensor: Transmission frequency: according to the time or luminosity change. Sun Protection or Generic Protection Alarms. Luminosity sensor calibration.
    – Relative Humidity sensor: Transmission frequency: according to the time or humiditychange. Alarms by high or low humidity. Humidity sensor calibration.
    • Dimensions: 78 x 28 x 23mm.
    • Battery-operated: 2 x 3V Lithium CR2032. Useful life higher than 8 years.
    • Programming and commissioning by ETS5 or later version.

  • BATTERY-OPERATED CEILING-MOUNTED KNX-RF MOVEMENT DETECTOR – DM K5X 001

    • Wireless KNX-RF Motion Detectors, with Infrared detection technology, for recessed mounting in a false ceiling, powered by battery.
    • It has a highly sensitive PIR sensor, which, together with the lens design, allows detecting the slightest movement within its coverage area.
    • Incorporates a luminosity sensor, which allows its functionality to be limited to daylight.
    • It has a second potentiometer that allows adjusting the delay time from the last detection.
    • It includes a series of parameters and functionalities that must be parameterized through the ETS:

    – Adjustment of delay time and luminosity by potentiometer or ETS.
    – Sending telegram after detection and at the end of the delay time.
    – Motion Monitoring Function.
    – Twilight Switch Function.
    – Temperature Sensor Function.
    – Brightness Sensor Function.

    • Flush-ceiling mounting.
    • Coverage: 360º and Ø7m at 2,5m high.
    • Battery-operated. Useful life higher than 4 years.
    • Programming and commissioning by ETS5 or later version.

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies