1-channel DALI Gateway – RE K5X DA1

Wireless 1-channel DALI Gateway for Ballasts or Drivers

Description

 

  • 1-channel KNX RF S-Mode wireless Dimming actuator for DALI Drivers or Ballasts, with LED or Fluorescence lighting.
  • Allows upgrading the KNX installation without placing KNX bus wires.
  • Operates in KNX RF+ protocol in System-Mode.
  • Communication with the KNX Bus must be carried out using a KNX / KNX RF S-Mode
    media coupler: “CO K5X 002”.
  • Power supply: 230VAC 50/60Hz.
  • Different functions which can be configured with ETS:
    · Time of soft on and off.
    · Maximum and minimum dimming level.
    · Behavior after on telegram.
  • Staircase time switch and Sequential operation modes.
  • Auxiliary Pushbutton input with configurable operation.
  • It incorporates the KNX-RF signal repeater function (optional), which allows extending
    the distance between transmitters and receivers.
  • Adjustable behavior in case of bus voltage failure.
  • 5 pre-configured scenes.
  • Flush mounted in junction box.
  • Programming and commissioning by ETS5 via the KNX-RF+ USB stick “CO K5X 001”.

Technical Features

Reference RE K5X DA1
Power supply 230Vac 50/60Hz
Consumption <3W
Type of Load DALI Drivers or Ballests
Maximum Number of ECGs 64
KNX Medium KNX-RF 1.R
Radio-frecuency 868,3MHz
Transmission Power <10dBm
Range In the free field: 100m // Indoors: 30m
Number of Outputs 1
Application Software ETS5
Commissioning Mode System Mode
Mounting Flush-mounting within universal box
Dimensions 46 x 46 x 30mm
Protection Degree IP20
According to the Standards EN60669-2-1
Compatible with IEC14543-3

 

Dimensions

Wiring Diagram

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies