Dinuy

Home / Motion Detectors / Motion Detectors for Wired Installations

Motion Detectors Wired Installation

WALL MOUNTING

DM SUP 000:

• Wall mounted IR motion detector
• Coverage: 180º & 12m (max.)
• Time delay and brightness level are adjustable
• Maximum load: 3000W. Admits fluorescence and LED lamps
• Environmental protection: IP44
• Adjustable by remote control (EM MAN DM0)

DM SUP 002:

Wall or corner mounted IR motion detector
• Coverage: 240º & 12m (max.)
• Time delay, brightness level and sensitivity are adjustable
• Maximum load: 3000W. Admits fluorescence and LED lamps
• Environmental protection: IP54
• Adjustable by remote control (EM MAN DM0)
DM BRA 000 nuevo

DM BRA 000:

• Wall or ceiling mounted IR motion detector
• Coverage: 180º & 12m (max.)
• Time delay, brightness level and sensitivity are adjustable
• Maximum load: 2000W. Admits fluorescence and LED lamps
• Environmental protection: IP55

WALL MOUNTING

DM TEC PA1

DM TEC PA1:

• Ceiling mounted IR motion detector specially-designed for narrow areas, for example: corridors
• Flush-ceiling mounting
• Coverage: 22m x 4m (max. at 2,5m high & walking across)
• Time delay, brightness level and sensitivity (by remote control) are adjustable
• Maximum load: 3000W. Admits fluorescent and LED lamps
• Adjustable by remote control (EM MAN DM0)

DM TEC 001:

• Surface-ceiling mounted IR motion detector
• Coverage: 360º in Ø7m (max. at 2.5m high)
• Time delay, brightness level and sensitivity (by remote control) are adjustable
• Maximum load: 3000W. Admits fluorescent and LED lamps
• Adjustable by remote control (EM MAN DM0)

DM TEC 003:

• Flush-ceiling mounted IR motion detector
• Coverage: 360º in Ø7m (max. at 2.5m high)Time delay, brightness level and sensitivity (by remote control) are adjustable
• Maximum load: 3000W. Admits fluorescent and LED lamps
• Adjustable by remote control (EM MAN DM0)

DM TEC 002:

• Flush-ceiling mounted IR motion detector
• Coverage: 360º in Ø6m (max. at 2.5m high)
• Time delay, brightness level and sensitivity are adjustable
• Maximum load: 3000W. Admits fluorescent and LED lamps
• 2 output channels for two different loads (e. g.: lamps and extractor fan)
Motion detector, movement detector, DM TEC 004

DM TEC 004:

• Flush-ceiling mounted IR motion detector
• Coverage: 360º in Ø7m (max. at 2.5m high)
• Time delay, brightness level and sensitivity (by remote control) are adjustable
• Maximum load: 3000W. Admits fluorescent and LED lamps
• 1 output channel
• Admits up to 15 extra sensors (DM SEN T03)
Adjustable by remote control (EM MAN DM0)

DM SEN T03:

• Extra sensor for DM TEC 004
• Flush-ceiling mounting
• Time delay, brightness level and sensitivity (by remote control) are adjustable
• Coverage: 360º in Ø7m (max. at 2.5m high)
Adjustable by remote control (EM MAN DM0)

DM TEC 000:

• Mini IR motion detector (ceiling hole: Ø32mm)
• Flush-ceiling mounting
• Time delay, brightness level and sensitivity are adjustable
• Coverage: 360º in Ø6m (max. at 2.5m high)
• Maximum load: 2000W. Admits fluorescent and LED lamps

DM TEC 300:

• High-coverage ceiling IR motion detector
• Surface or flush ceiling mounting
Time delay, brightness level and sensitivity are adjustable
• Coverage: 360º in Ø30m (max. at 2.5m high)
• Maximum load: 2000W. Admits fluorescent and LED lamps
• Adjustable by remote control (EM MAN DM1)
dm tec o10 foto

DM TEC 010:

• Detector for installation at high altitude , for example and industrial buildings , sports centers, warehouses, etc
• Ceiling mounting surface , covering up to 16m in diameter at a height 10m .
• Valid for all types of lamps including LED, fluorescent, low consumption, etc.
• Simple programming from the detector or adjustable by remote control (EM MAN DM2)

UNIVERSAL MECHANISM BOX MOUNTING

DM CAM Nuevo

DM CAM 001:

• Universal mechanism box mounted IR motion detector
• Coverage: 200º in 8m (max.)
• Time delay, brightness level and sensitivity are adjustable
• Maximum load: 2000W. Admits fluorescent and LED lamps
• 3-wires installation
DM CAM Nuevo

DM CAM 002:

• Universal mechanism box mounted IR motion detector
• Coverage: 200º in 8m (max.)
• Time delay, brightness level and sensitivity are adjustable
• Maximum load: 400W. Does not admit contactor, fluorescence, LED lamps..
• 2-wires installation

CONCEALED MOUNTING (HIGH FREQUENCY)

 
DM-HF1-000

DM HF1 000:

• The sensor is an active motion detector; it emits a high-frequency electromagnetic wave 5.8GHz and receives its echo
• The sensor detects the change in echo from movement in its detection zone. A microprocessor then triggers the switch light ON command
• Detection is possible through doors, panels of glasses, thin walls, false ceilings... This involves a necessary adjustment in restricting the covered area to avoid false detections in adjacent rooms

LED LAMP FIXTURE

 
Plafon LEDs con detector de movmiento

 

DM HF1 PL1:

• LED lamp with motion detector lighting for under cover areas. Celing mounting surface.
• Power consumption : 11W (DM HF1 PL1 )
• Number of LEDs: 30 ( 11W )
• Light output : 871lm ( 11W )
• Incorporating high frequency movement detector ( RADAR ).
Plafon LEDs con detector de movmiento

DM HF1 PL2:

• LED lamp with motion detector lighting for under cover areas. Celing mounting surface.
• Power consumption : 18W (DM HF1 PL1 )
• Number of LEDs: 50 ( 18W )
• Light output : 1541lm (18W) 
• Incorporating high frequency movement detector ( RADAR ) .

OTHER VOLTAGES

DM TEC 241:

• Rated voltage: 24Vdc or 24Vac
• Surface-ceiling mounted IR motion detector
• Coverage: 360º in Ø7m (max. at 2.5m high)
• Time delay, brightness level and sensitivity (by remote control) are adjustable
• Maximum load: 1500W. >Admits fluorescent and LED lamps
• Adjustable by remote control (EM MAN DM0)

DM TEC 243:

• Rated voltage: 24Vdc or 24Vac
• Flush-ceiling mounted IR motion detector
• Coverage: 360º in Ø7m (max. at 2.5m high)
• Time delay, brightness level and sensitivity (by remote control) are adjustable
• Maximum load: 1500W. Admits fluorescent and LED lamps
• Adjustable by remote control (EM MAN DM0)

WITH STAND-BY LEVEL SETTING

DM TE1 001:

• Ceiling mounted IR motion detector with stand-by level setting for 1/10Vdc equipments
• Surface-ceiling mounting
• Coverage: 360º in Ø7m (max. at 2.5m high)
• Maximum load: 80 1/10V ballasts
• Adjustable by remote control (EM MAN DM0)

DM TE1 DA1:

• Ceiling mounted IR motion detector with stand-by level setting for DALI equipments
• Surface-ceiling mounting
• Coverage: 360º in Ø7m (max. at 2.5m high)
• Maximum load: 64 DALI ballasts
• Adjustable by remote control (EM MAN DM0)
RE DMS 001 NUEVO OJO

RE DMS 001:

• Ceiling mounted IR motion detector with stand-by level setting for 1/10Vdc equipments
• Flush-ceiling mounting
• Coverage: 360º in Ø7m (max. at 2.5m high)
• Maximum load: 80 1/10V ballasts
• Adjustable by remote control (EM MAN DM0)
RE DMS DA1 NUEVO OJO

RE DMS DA1:

• Ceiling mounted IR motion detector with stand-by level setting for DALI equipments
• Flush-ceiling mounting
• Coverage: 360º in Ø7m (max. at 2.5m high)
• Maximum load: 64 DALI ballasts
• Adjustable by remote control (EM MAN DM0)

ACCESSORIES

EM MAN DM0:

• Remote control for the adjustment of the motion detectors: time delay, sensitivity and Lux
• Infrared communication
• Compatible with: DM SUP 000, DM SUP 002, DM TEC 001, DM TEC 003, DM TEC 004, DM SEN T03 & DM TEC PA1

EM MAN DM1:

• Remote control for the adjustment of the motion detectors: time delay, sensitivity and Lux
• Infrared communication
• Compatible with: DM TEC 300

EM MAN DM2:

• Remote control for the adjustment of the motion detectors: time delay, sensitivity and Lux
• Infrared communication
• Compatible with: DM TEC 010
Filtro RC

AC DM 002:

• RC filter for the suppression of interferences generated by switching inductive loads such as relays, contactors, fluorescent bulbs, transformers, etc.
• Avoid continuous re-shotting motion detectors caused by highinductive voltage generated in the switching of certain loads

Location

icono gmapsDinuy S.A.
c/ Auzolan, 2. 20303 IRUN, Spain
View contact map >

Contact us

Contact us here:

  • +34 943 62 79 88

Social networks

Share us on the major social networks. Or follow us on our RSS:
Home / Motion Detectors / Motion Detectors for Wired Installations

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información. Para saber más sobre las cookies, su uso y como deshabilitarlos, lea política de cookies aquí.

Acepto las cookies para este sitio.