Dinuy

Home / Dinulink KNX / KNX - Twisted Pair (KNX-TP)

KNX - TWISTED PAIR (KNX-TP)


POWER SUPPLY

FA KNT 001 2

FA KNT 001:

• Power supply of 640mA , to generate and monitor power Bus EIB / KNX.
• The bus line is isolated from the network by the coil.
• There is a second auxiliary output not isolated from the network.
• Programing by ETS: program ETS3

Download Instructions

TRANSMITTERS / SENSORS

EM KNT 001

EM KNT 001:

• It has 4 independent channels , which can function as binary inputs or outputs , depending on how parametricen by ETS software.
• This device can be used as buttons or switches interface for reading binary input or as an output for display using LEDs.
• Power supplied by the Bus.
• Each of the four channels has the following functions: switching, dimming , blinds control , Scene Control , Pulse Count , LED display , etc.
• Programing by ETS: program ETS4

Download InstructionsUser Manual
EM KNT 002 Probe copia

EM KNT 002:

• It has 4 independent channels, which can function as binary or analog inputs, depending on how parametricen by ETS software.
• This device can be used as interface buttons or switches, for reading binary inputs or as analog temperature sensor input (with external probe).
• Power supplied by the Bus.
• Each of the four channels has the following functions: switching, dimming, blinds control, Scene Control, Pulse Count, temperature control, thermostat, etc.
• Programing by ETS: program ETS4

 
  
Download InstructionsUser manual
DM KNT 001

DM KNT 001:

• Infrared Movement detector.
• Mounting in false ceiling.
• Functions: Motion detection, constant light control, Twilight switch, light or temperature sensor.
• Power supplied by the Bus.
• Coverage: Ø7m to 2.5m high.
• Programing by ETS: program ETS3 / program ETS4


Download InstructionsUser manual

RECEIVERS / ACTUATORS

DM KNT 002

DM KNT 002:

• Infrared Movement detector.
• Surface mount.

• Functions: Motion detection, constant light control , Twilight switch , light or temperature sensor.
• Power supplied by the Bus.
• Coverage: 180º / 10m.
• Programing by ETS: program ETS3 / program ETS4

Download Instructions
Actuador de Regulacion Universal de 1 canal KNX, RE KNT 000

RE KNT 000:

• Universal dimmer , 1 channel for RLC loads and LED.
• Load: incandescent, halogen , LED , Fluorescent - Compact , ...
• Up to 1000W maximum capacity Incandescent.
• Installation on DIN rail.
• Power supply 230V.
• Programing by ETS: program ETS3 / program ETS4

Download Instructions User manual
Reguladores de luz KNX , RE KNT DA1

RE KNT DA1:

• 3-channel modular DALI dimming actutor (up to 64 equipments).
• Protected against overloads and short-circuits. Built-in heating protection.
• Anti-panic input for safety systems.
• Installation in DIN rail.
• Power supply 230V.
• Programinf by ETS: program ETS3 / program ETS4

Download Instructions
RE KNT 110 nuevo

RE KNT 110:

• 3-channel modular 1-10VDC dimming actuator (up to 200 equipments).
• Protected against overloads and short-circuits. Built-in heating protection.
• Anti-panic input for safety systems.

• Installation in DIN rail.
• Power supply 230V.
• Programing by ETS: program ETS3program ETS4

Download Instructions
Regulador para tiras RGBW, RE KNT RGW

RE KNT RGB:

• Dimming actuator to control RGBW LED strips .
• Power supply:12Vcc - 24Vcc.
• It has 4 output channels 16A per channel , with a maximum capacity of 32A.
• Control via KNX PT ( Twisted Pair to 24VDC ).

• Protected against overloads and short-circuits. 
• Formato modular, para su instaación sobre carril DIN.
• Anti-panic input for safety systems.
• Programing by ETS4: program ETS4
 IT KNX 001

 

IT KNT 001:

• 1-channel blinds actuator or 2-channel switch.
• Up to 16A switching capacity per channel.

Power supplied by the Bus. 
• Possibility of manual operation from the device.
• Installation in DIN rail.
• Programing by ETS:program ETS3 /program ETS4

Download Instructions
User manual
IT KNT 004

IT KNT 004:

• 4-channel switching actuator.
• Maximun load: 16A per channel.
• Installation in DIN rail.
• Power supplied by the Bus.
• Programing by ETS3 or later:
program ETS3

   Download Instructions User manual
IT KNT 012

IT KNT 012:

• 12-channel switching actuator.
• Maximun load: 16A per channel.
• Installation in DIN rail.
• Power supplied by the Bus.
• Programing by ETS3 or later : program ETS3

Download Instructions User manual
 

COMUNICATION

Acoplador de medios KNX

CO KNX 002:

• RF-KNX / KNX- PT media coupler.
• Interface between wireless and twisted-pair devices.
• It allows the transmission of telegrams from the radio modules to KNX Bus devices and vice versa (bidirectional communication).
• Can be used together with devices to control lighting, HVAC, blinds/shutters and main purpose devices.
• Up to 16 bidirectional RF or TP independent channels.
• Power supply: BUS KNX 24VDC.
• Installation in DIN rail.

• Programing by ETS: program ETS4

Download Instructions User manual
CO KNT 001

CO KNT 001:

• Communication interface between DINUY dimmers and any KNX-TP compatible divice.
• Al the moment that receives a signal from a sensor transmits the order to the dimmer, being possible to control almost any type of load.
• Compatible with all DINUY modular dimmers. Unidirectional communication.
• It allows switching ON/OFF, Dim and save or recall up to 8 lighting scenes.
• Installation in DIN rail.
• Power supply: BUS KNX 24VDC.
• Programing by ETS: 
program ETS3 / program ETS4


Download Instructions
CO KNT 002

CO KNT 002:

• KNX USB Interface Stick.
• Establishes a bidirectional connection between a PC and the KNX installation bus.
• Galvanic separation from the KNX bus.
• Both ETS versions ETS3 or later and some visualization tools supports this interface.

 
 

ACCESSORIES

 
Sonda de Tempratura KNX

 

ST KNT 001:

• NTC temperature probe for EM KNT 002 sensor.
• Probe length: 3 meters.

Location

icono gmapsDinuy S.A.
c/ Auzolan, 2. 20303 IRUN, Spain
View contact map >

Contact us

Contact us here:

  • +34 943 62 79 88

Social networks

Share us on the major social networks. Or follow us on our RSS:
Home / Dinulink KNX / KNX - Twisted Pair (KNX-TP)

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información. Para saber más sobre las cookies, su uso y como deshabilitarlos, lea política de cookies aquí.

Acepto las cookies para este sitio.